machine testing for client, 200-300kg/h floating fish feed pellet extruder machine
May 12, 2026
Introduction
Recently, our factory completed a successful testing process for a 200-300kg/h floating fish food pellet making machine before shipment to the customer. During the machine trial, engineers tested pellet floating performance, production stability, extrusion pressure, and raw material adaptability to ensure stable operation after installation.
The customer mainly focused on floating feed quality, pellet size consistency, machine running stability, and actual production capacity.
This floating fish feed pellet extruder machine is suitable for fish farms, aquaculture cooperatives, and small-to-medium aquatic feed manufacturing businesses.
What Was Tested During The floating fish feed pellet mill Trial
During the factory testing process, the engineering team inspected the complete fish feed extrusion workflow.
Main Testing Items
- Floating ability of fish feed pellets
- Pellet puffing stability
- Production output consistency
- Machine operating condition
- Pellet surface quality
- Feed moisture control
- Continuous extrusion performance
The machine operated continuously during the trial and produced stable floating feed pellets without blockage.
Raw Materials Used During The floating fish food extruder machine Testing
The customer selected several common aquaculture feed ingredients for practical testing.
Tested Feed Ingredients
- Corn flour
- Soybean meal
- Fish meal
- Wheat bran
- Rice bran
- Vitamin premix
These materials were mixed evenly before entering the floating fish feed extruder machine.
Why Raw Material Compatibility Testing Matters
Different feed formulas directly affect:
- Pellet floating performance
- Feed expansion ratio
- Pellet hardness
- Water stability
- Feed digestibility
Testing local feed ingredients before shipment helps customers reduce future production risks.
Finished Floating Fish Feed Pellet Performance
The finished pellets produced during the testing process showed stable physical quality suitable for aquaculture feed production.
Pellet Features
Stable Floating Ability
Pellets floated continuously on water without sinking rapidly.
Uniform Pellet Diameter
The extrusion system produced consistent pellet sizes during operation.
Smooth Pellet Surface
Stable extrusion pressure improved pellet appearance and reduced powder.
Good Water Stability
Pellets maintained structure in water and reduced feed waste.
Adjustable Pellet Sizes
Different die molds can produce pellets for different fish growth stages.
These pellet characteristics are important for improving feeding efficiency and aquaculture profitability.
Main Advantages Of The 200-300kg/h floating fish feed processing machine
Compact Machine Structure
Suitable for small and medium-sized feed production workshops.
Stable Continuous Production
The machine supports continuous commercial feed manufacturing.
Flexible Feed Formula Compatibility
Can process different aquatic feed ingredients.
Easy Operation And Maintenance
Simple structure improves daily maintenance efficiency.
Lower Investment Cost
Suitable for startup fish feed businesses and aquaculture farms.
Floating Fish Feed Production Process During Testing
The factory trial demonstrated the complete fish feed manufacturing process.
Production Steps
Raw Material Crushing
Large materials are ground into fine powder.
Feed Mixing
Ingredients are mixed uniformly.
Extrusion Puffing
The floating fish feed extruder cooks and shapes pellets under high temperature and pressure.
Pellet Drying
The drying machine removes excess moisture.
Cooling And Packaging
Finished pellets are cooled before packaging and storage.
Stable process control helps improve finished pellet quality consistency.
Common Problems And Solutions During Fish Feed Production
Why Are Fish Feed Pellets Not Floating Properly?
Possible Causes
- Low starch content
- Insufficient extrusion temperature
- Incorrect moisture ratio
Solutions
- Increase corn flour proportion
- Adjust extrusion temperature
- Maintain proper feed moisture
Why Does The floating fish feed pellet maker machine Become Blocked?
Possible Causes
- Large raw material particles
- Excessive moisture
- Unstable feeding speed
Solutions
- Improve crushing fineness
- Reduce water addition
- Maintain continuous feeding
Why Are Finished Fish Feed Pellets Breaking After Drying?
Possible Causes
- Excessive drying temperature
- Poor formula balance
- Rapid moisture removal
Solutions
- Lower dryer temperature gradually
- Improve feed ingredient ratio
- Extend drying time properly
Why Is Production Output Lower Than Expected?
Possible Causes
- Screw wear
- Motor instability
- Incorrect feed formula
Solutions
- Inspect screw condition regularly
- Check electrical system
- Optimize raw material proportion
FAQ
Q1: What fish species can this floating fish food production machine produce feed for?
The machine can produce feed for tilapia, catfish, carp, ornamental fish, and other aquatic species.
Q2: Can the floating fish feed extruder machine produce sinking fish feed?
Yes. By adjusting formulas and extrusion settings, the machine can produce floating or sinking pellets.
Q3: Why are floating fish feed pellets sinking after production?
Low starch content or insufficient extrusion pressure may reduce pellet buoyancy.
Q4: What is the recommended moisture content before extrusion?
The recommended moisture content is generally around 20%-25%.
Q5: Why does the extrusion screw wear quickly?
Continuous overload production or abrasive raw materials may increase screw wear.
Conclusion
The successful machine testing process for the 200-300kg/h floating fish food pellet maker machine demonstrated stable production performance, reliable floating pellet quality, and smooth continuous operation.
For fish farms and commercial aquaculture feed manufacturers, this extrusion system provides a practical solution for producing high-quality floating fish feed with flexible feed formulas and efficient production capacity.